Tuesday, 27 October 2015

806H HOT POUR BITUMEN



 

806H HOT POUR BITUMEN

DESCRIPTION

806H is a hot-poured, polymer modified bitumen compound. It remains solid, stable and still flexible under the extreme tropical weather conditions. It passed the Bond Testing; Determining of adhesion and cohesion following extension and compression, BS2499:Part 3: 1993 – Hot-applied joint sealant systems for concrete pavements.
 USAGE 

806H is used as an expansion movement joint sealant for horizontal joints in asphalt or concrete pavements, bridges, roads, and airfields.

Colour:
Black.

Form:
Plastic solid.

Packaging: 25kg

BOSTIK FLOOR HARDENER NM (NON-METALLIC)





DESCRIPTION
Bostik Floor Hardener NM is a pre-blended, ready to use and dry shake formulation for hardening freshly placed horizontal concrete slabs and toppings. Floor Hardener NM produces a hard, dense, wear resistant surface which resists corrosion and absorption of grease, oils, alkalis and most chemicals. Typical areas of use include concrete floors in garages, steel mills, generating plants,
loading platforms and wherever a heavy-duty wear resistant floor finish is required.

USES
- Ideal for use in warehouses, factories, car parks, driving and loading ramps, garages, mechanical
     /power rooms, wet rooms and outdoor surfaces of all kinds, etc.
- Easy to apply and even easier to maintain
- High abrasion and impact resistance
- Suitable for constantly wet areas; non-skid and non-slip
- Dust-proof
- Resistant to gas, oil, minerals, solvents and other chemicals

FEATURES
- Provides a monolithic hardening surface within the concrete matrix
- Provides a wear resistant surface
- Provides high impact resistance
- Easy to use and economical
- Non-slip characteristics
- Resists oil and grease penetration, and reduces dusting

Packing:25kg bag

NS CRACK SEALER (FOR HOLLOW FLOORS AND HAIRLINE CRACKS)






NS CRACK SEALER
Sealer for non structural hair cracks in concrete and hollow floors

Description
NS Crack Sealer is a low viscosity, specially blended acrylic copolymer emulsion based product with exceptional penetrating properties. It has been used successfully for sealing hairline cracks in reinforced concrete, granolithic, mosaic and terrazzo floors and for consolidating hollow floor screeds. As it is water based, it can only be applied to dry surfaces otherwise it will not set. The water content in the product must either dry out through the surroundings or evaporate.

Once set NS Crack Sealer has good chemical resistance, flexibility and bond strength. Its exceptional penetrating properties enable it to be poured into fine hair cracks with minimal assistance and it will penetrate deep into the structure. As the product sets it will seal the crack helping to prevent further ingress of moisture and being flexible can accommodate a small degree of movement of the structure. Provided the cracks are clean a good bond will be obtained to the surfaces. NS Crack Sealer , when set, forms a rubbery mass, which has been constantly used for consolidating hollow floor screeds, often saving their complete removal. Sometimes it is possible to seal large cracks by repeated applications, but we have other products more ideally suited to this applications, and our representatives will be pleased to provide further information on the full range of products available.

Independent tests have shown that NS Crack Sealer would have no effect on the potability of water and can be used safely in reservoir or other water retaining structures.


Uses
• Sealing non structural hairline cracks in reinforced concrete
• Sealing cracks in horizontal surfaces such as granolithic, mosaic and terrazzo floors.
• Consolidating hollow floor screeds
• Sealing cracks in vertical surfaces
• Re-bonding renders

Reasons to use NS Crack Sealer
• Ready to use – no mixing required
• Good flexibility
• Good bond strength
• Exceptional penetrating properties
• Can be poured into cracks with minimal assistance

Packing: 25litre, 5 litre pail

Saturday, 24 October 2015

SIKADUR 42MY (POURABLE EPOXY GROUT)








Sikadur 42 MY - Pourable epoxy grout

Product Description
Sikadur 42 MY is a 3-part pourable grout, based on a combination of epoxy resins and specially graded aggregates. After mixing, it forms a flowable mortar, suitable for grouting and filling.

Uses
- Self-levelling, flowable epoxy mortar on concrete, stone, mortar, steel, aluminium, asbestos, cement, wood, polyester and
     epoxy
- Structural bonding of starter bars, anchors, support, braces and tie bars
- Grouting of crash barrier posts, bearing plates, machine bases, mechanical bridge joints and bridge bearings
- Tie-less rail grouting of crane rails, in tunnels and on bridges

Characteristics / Advantages
- Fast, accurate fixing
- Rapid strength gain
- Shrinkage free hardening
- High mechanical strength
- Hardens even at high humidity
- High resistance against abrasion impact and vibration
- Can be applied on dry and damp surfaces (no standing water)
- Good flow characteristics even in thin layers

Product Data
Appearance / Colours Concrete grey powder
Packaging 25 kg sets (Parts A+B+C)

Technical Data
Chemical Base Epoxy resins
Density (20°C) ~ 2.0 kg/ltr
Layer Thickness 12 mm min. / 50 mm max.

SIKADUR 31-CF (EPOXY ADHESIVE)


Sikadur®-31 CF Normal (formerly known as Sikadur®-31 LP)
2-part thixotropic epoxy adhesive

Product Description
Sikadur®-31 CF Normal is a moisture tolerant, thixotropic, structural two part adhesive and repair mortar, based on a combination of epoxy resins and special fillers, designed for use at temperatures between +10°C and +30°C.

Uses
As a structural adhesive and mortar for:
- Concrete elements
- Hard natural stone
- Ceramics, fiber cement
- Mortar, Bricks, Masonry
- Steel, Iron, Aluminium
- Wood
- Polyester, Epoxy
- Glass

As a repair mortar and adhesive:
- Corners and edges
- Holes and void filling
- Vertical and overhead use

Joint filling and crack sealing:
- Joint and crack arris / edge repair

Characteristics / Advantages
Sikadur®-31 CF Normal has the following advantages:
- Easy to mix and apply
- Suitable for dry and damp concrete surfaces
- Very good adhesion to most construction materials
- High strength adhesive
- Thixotropic: non-sag in vertical and overhead applications
- Hardens without shrinkage
- Different coloured components (for mixing control)
- No primer needed
- High initial and ultimate mechanical strength
- Good abrasion resistance
- Impermeable to liquids and water vapour
- Good chemical resistance

Packaging: 5kg pack

SIKADUR 52MY (LOW VISCOSITY INJECTION RESIN)








Sikadur®-52 MY - Low viscosity injection resins

Product Description
Sikadur®-52 MY is a two part, solvent free, low viscosity injection-liquids, based on high strength epoxy resins.

Uses
As an injection resin with good adhesion to concrete, mortar, stone, steel and wood. Sikadur®-52 MY is used to fill and seal voids and cracks in structures such as bridges and other civil engineering buildings, industrial and residential buildings, e.g. columns, beams, foundations, walls, floors and water retaining structures. It not only forms an effective barrier against water infiltration and corrosion promoting media, but it also structurally bonds the concrete sections together.

Characteristics / Advantages
-Solvent free
- Suitable for both, dry and damp conditions
- Shrinkage free hardening
- High mechanical and adhesive strengths
- Hard but not brittle
- Low viscosity
- Injectable with single component pumps

Product Data
Colours
- Part A: Transparent
- Part B: Brownish
- Part A+B mixed: Light brown

Packaging 15 kg sets

SIKAFLOOR 3 QUARTZTOP FLOOR HARDENER



Sikafloor®-3 QuartzTop
Coloured mineral dry shake floor hardener

Product Description
Sikafloor®-3 QuartzTop is a ready to use dry shake floor hardener composed of cement and hard aggregates of mineral origin. The aggregates used have been selected for their shape, grading and high physical and mechanical quality.

Uses
Sikafloor®-3 QuartzTop is suitable for surface hardening of floor slabs and screeds where good abrasion resistance and reduced dusting is required. It is suitable for floors subjected to severe mechanical wear, for example:
 Warehouses
 Quays
 Engineering workshops
 Parking lots
 Service stations and factories
 Ports
 Garages, etc.

Characteristics / Advantages
 Intrinsic colouring
 High resistance to abrasion
 Reduces dusting
 Improves resistance to impact
 Improves resistance to oils and greases
 Easy to apply. Sikafloor®-3 QuartzTop is broadcast over the fresh slab
 Saves time and labour costs by eliminating the need for a granolithic screed

Product Data
Form
Appearance / Colours Powder; Natural, Light Green, Dark Green, Terracotta and Grey
Packaging 25 kg bags

WATERSEAL LIQUID WATERPROOFING ADMIXTURE


WATERSEAL
lntergral Waterproofer for Concrete and Mortar

Descriptions
A semi-paste concrete admixture, combining a reactive stearate with a water reducing agent to produce dense, waterproof concrete and mortar.

Uses
lntegral waterproofing and plasticising admixture for concrete and mortar.
Typical uses are: Footings, walls and floor slabs, precast panels, tanks and reservoirs, cement mortar,
plaster and stucco.

Features
-Reduces amount of mixing water.
-lncreases plastic workability.
-Allows normal setting and curing.
-Reduces shrinkage.
-Promotes increased density.
-Minimizes capillary water movement.
-Lowers permeability.
-Promotes high strengths
-Waterproofs integrally

Specifications
All concrete to be waterproofed shall be of a minimum 20 MPa design and shall be integrally
waterproofed by the addition of Waterseal as supplied by Ecomas used in strict accordance with the
printed instructions.

Packing: 25litre pail

SIKA MICROCRETE 2000



Sika Microcrete-2000 - Dual shrinkage-compensated, flowing, cementitious repair material for formwork repairs

Product Description
Sika Microcrete-2000 is a dual shrinkage-compensated pre-bagged flowing micro concrete. It has very good flow properties and has been specifically developed to reduce heat generation. As such, large volume repairs may be performed without addition of aggregates. With its high silica fume content and combination of blended cement, a highly dense, impervious and hence durable repair mortar is obtained.

Sika® Microcrete-2000 contains blended cement, silica fume, fibres, graded aggregates and additives which give rise to controlled expansion in both the plastic and hardened states.

Uses
Sika Microcrete-2000 is suitable for structural repairs to marine structures, bridges, columns, etc. It is also conducive for use in the following repair works where single placing is in excess of 25 mm thickness:
- Bridge columns and beams
- Jetty piles
- Concrete piling
- Spillways
- Dams
- Grouting applications

Sika® Microcrete-2000 can be applied by gravity pour or mechanical pumping.

Characteristics / Advantages
- Pre-bagged at the factory / consistent quality
- Easy to mix and apply
- Good flow characteristics
- Suitable for large repairs
- High ultimate strengths
- Very dense and durable
- Non-toxic and non-corrosive
- Chloride and iron-free
- Impact and vibration resistant
- Gaseous expansion system to compensate plastic shrinkage
- Controlled crystalline expansion system to compensate shrinkage in the hardened state

Appearance / Colour Pre-bagged concrete grey powder
Packaging 25 kg bags

Technical Data
Density ~ 2.25 kg/ltr (freshly mixed mortar)
Aggregate Size 6 mm max.

TORCHBELL


PROPANE OR BUTANE GAS TORCHES FOR HEAT SEALING BITUMINOUS MEMBRANES

Bell Diametre:70mm

JOINTFLEX FILLERBOARD

 

Jointflex® is a closed cell, crossed linked, non-absorbent polyethylene expansion joint fillerboard for use in expansion and isolation joints in concrete and masonry structures. Jointflex® is UV resistant, has excellent weatherability, is non-absorbent allowing it to be used in water retaining and water excluding structures where, potable, salt, chlorine and sewerage water is prevalent. Jointflex® is also for use in trafficable joint conditions.

Jointflex® has no bitumen content and joint sealant can be directly applied on top of it without the use of a bond-breaker tape. Jointflex® is available in standard 50kg/m³ (low) density and is also available in custom densities of 100kg/m³ (medium) and 150kg/m³ (high).

Supplied in sheet form and at a thickness to suit the joint width or can be custom cut in sheet sizes to suit the concrete thickness or width. Also available upon request with a tear off cap to suit the joint sealant application depth.

Size and dimension:
2m x 1m

Thickness:
10mm, 12mm, 15mm, 20mm & 25mm

Friday, 23 October 2015

SIKAFLEX CONSTRUCTION AP (POLYURETHANE SEALANT)


Sikaflex® Construction AP (previously known as Sikaflex® Construction J)
1-part polyurethane sealant for building joints

Product Description
Sikaflex® Construction AP is a one part, moisture curing, elastic joint sealant based
on polyurethane. It is suitable for outdoor applications.

Uses
Sikaflex® Construction AP is used as a general purpose sealant for sealing joints in building construction such as movement and construction/isolation joints around windows and doors, facades, claddings, etc. in concrete, brick, wood, metal and PVC sections and structures, etc.

Characteristics / Advantages
 One component, ready to use
 Weather resistance, excellent aging resistance
 Movements capability: 25%
 Very good adhesion to many substrates
 Excellent workability
 High tear resistance
 Can be overpainted (subject to compatibility trials)

Packaging: 600ml sausage, 20ssg per carton
Color: Grey, White, Black

BOSTIK BOSCOSEAL ADMIX (WATERPROOFING ADMIXTURES)



BOSCOSEAL ADMIX (WATERPROOFING ADMIXTURES)

BOSTIK Boscoseal Admix is use for treating the concrete to create protection and waterproofing in it. This admix is a concrete additive design to be added at the time of batching and by doing so catalytic crystalline growth are being form within the concrete making it waterproof.

RECOMMENDED USES
Suitable for all water tank
Water retaining structures
Basements
Marine application
Reservoirs

FEATURES & BENEFITS
Maximizes waterproofing within concrete
Withstand extreme hydrostatic pressure > 7bar
Exceptional durability - 20 C to 50 C
Reduces shrinkage and cracking
Protection of concrete against certain aggressive chemicals including chloride attack to steel reinforcing
Sealing static cracks up to 0.4mm
Complies with SS 375 : 2001 - portable water

Packing: 20kg pail

ECM RUBBER BIG HUMP



















ECM RUBBER BIG HUMP
Size: 1000mm (W) x 500mm (W) x 70mm (H)
Color: Black & Yellow


To slow down speed for big vehicles like lorries/ trailers, Suv and 4x4

XPS EXTRUDED POLYSTYRENE BOARD





 
EXTRUDED POLYSTYRENE BOARD
SealFlex XPS extruded board manufactured in Singapore and is a hard type extruded polystyrene
thermal insulating product made of polystyrene combining with additives using extrusion method.

The board possesses a continuous and even external layer and completely closed honey-comb
cells structure achieved during the continuous extrusion process. The board is an excellent thermal
insulating material with high compression strength, low coefficient of thermal conductivity, low water absorption rate, low vapor permeance, long life because of its uniform wall thickness of linked honey comb structure and without any gap. These characteristics are the quality of an excellent
thermal insulating material. The excellent perionnances of thermal insulation, high compression,waterproofing make the board to be superior for use in new buildings.

BENEFITS
LOW COEFFICIENT OF THERMAL CONDUCTIVITY
“SealFlex XPS” extruded board can be as low as 0.027

 PROVIDE CONTINUOUS COVERAGE
 REDUCE AIR INFILTRATION
 HIGH COMPRESSION STRENGTH
 REDUCE POTENTIAL FOR CONDENSATION
 PROTECT AGAINST OUTSIDE MOISTURE
 RESIST MOISTURE ABSORBENCY

Size and dimension:
600mm x 1200mm

Thickness: 25mm, 50mm, 75mm

POLYSEAL PS POLYSULPHIDE SEALANT








POLYSEAL PS

DESCRIPTION
Polyseal PS is a two component, low modulus, chemically curing polysulphide joint sealant developed specifically for dynamic joints. It is based on a liquid polysulphide polymer which when mixed with the hardener, cures to form a tough rubber like seal. Polyseal PS exhibits excellent adhesion to most surfaces and has good resistance to most chemicals & weather conditions.

Polyseal PS is available in both gun and pouring grades. The gun grade is suitable for vertical or
horizontal application. It is available in a ready to mix, two and a half litre tin containing the base
and curing agent in correct proportions. The pouring grade is suitable for horizontal application and is available in 4 litre packs with base and curing agent in separate tins.

ADVANTAGES
- Highly resilient with excellent recovery characteristics.
- Provides permanent and uniform water tight seal.
- Stays flexible will nott become brittle or crack due to ultra violet exposure.
- Not affected by pool chemicals
- Prevents uncontrolled cracking by allowing expansion and contractions during temperature
   changes.
- Excellent adhesive to most common substrate.
- High resistance to aging, mild chemicals.
- Not harmful to human & environment.
- Can be recycled.

-STANDARDS COMPLIANCE
British Standard BS 4254 - 83
British Standard BS 6920 -88
ASTM C 920 - 79
US Federal specification TT-S- 00 227E
WRC for use in potable water.

Packaging: 4litre and 2.5litre pack

BOSTIK BOSCOSEAL PUE (EXPOSED LIQUID APPLIED POLYURETHANE WATERPROOFING)


BOSTIK BOSCOSEAL PUE

Boscoseal PU(E) is a premium grade liquid applied permanent elastic, cold applied and cold curing, one component polyurethane membrane used as long lasting and durable waterproofing.
It forms an elastic, waterproof and long life membrane, showing very good adhesion to the old substrate. It is used to establish and maintain continuous watertight seals. It protects building structures from humidity, acid rain, seawater, fuels, oils, bacteria and mild chemicals.

Color: Grey

Packaging: 22kg pail

SEALFOAM PU2000 (HYDROPHOBIC POLYURETHANE GROUT)




SEALFOAM PU2000
Single Component Water-Activated
Hydrophobic PU Grout

SealFoam PU 2000 is a hydrophobic hydroactive injection grout based on an MDI (methylene-diphenyl isocyanate) polyurethane. SealFoam PU 2000 has very fast reaction time and strong tensile strength. When SealFoam PU 2000 Fast reacts with water, it starts to foam and expand very quickly. As the grout react, it expands and stops the water leak within a very short period of time. SealFoam PU 2000 is one of most popular choice amount all the waterproofing grout.

Another major advantages in our newest SealFoam PU 2000 is the ease of application. Unlike other leading two-component grout in the market, SealFoam PU 2000 polyurethane grout is a one-component resin. No catalyst or 2nd component needed during the injection mixing.

Expansion ratio is depended on the amount of water added to the resin mixture and the moisture level in its environment. It reacts to a very dense and flexible material or to flexible foam. SealFoam PU 2000 is also approved for drinking water contact.

Packaging: 20kg tin

BOSTIK FLOWFILL GROUT GP


FlowFill Grout GP 














 

BOSTIK FLOWFILL GROUT GP
General purpose, non-shrink (Class A) cementitious grout ideal for most void filling grouting jobs.

APPLICATIONApplication thickness 20mm-120mm
  • Pre-hardening volume-adjusting. Controlled gaseous expansion system compensates for shrinkage and settlement before hardening occurs
  • Ready to use, pre mixed, requires only the addition of water
  • Can be pumped, trowelled, rammed or flowed to areas where normal grouting methods do not suffice
  • No metallic iron content to cause staining
  • Lower water/cement ratio reduces drying shrinkage, increases durability and reduces permeability

FEATURES AND BENEFITS
• Can be dry packed, rammed, toweled, poured and pumped.
• Economical, low in place cost.
• Ready to use, pre mixed, requires only the addition of water.
• No metallic iron content to cause staining.
• Lower water/cement ratio reduces drying shrinkage, increases durability and reduces permeability.
• Excellent flow characteristics, when used in fluid consistency, will fill intricate cavities.
• Complete void filling resulting from gaseous expansion in plastic state.


RECOMMENDED USES
When mixed with water, this product is a free flowing pourable grout for machinery bedding, packing and general construction.

Packaging: 25kg bag

BOSTIK MOISTURE SEAL



Bostik Moisture Seal is a two part water based epoxy coating designed as a moisture and vapour barrier membrane to prevent water seepage and permeation through concrete floors. The product shows excellent adhesion and acts as a surface preparation for subsequent adhesives when laying floor coverings of all kinds.
 
FEATURES AND BENEFITS

  • Easy water clean up 
  • Withstands high levels of hydrostatic head of water pressure (up to 25 metres or 250 kPa) 
  • Excellent adhesion to recommended substrates 
  • Convenient equal part mixing ratio by volume or weight 
  • Approved for use with potable (drinking) water, conforms to AS4020 (1992) 
  • Tested to ASTM E96 for water vapour transmission 
  • Environmentally friendly 
  • Non flammable, negligible odour and toxicity
  • Has excellent adhesion to most substrates including bricks, masonry, concrete, compressed fibreboard , stone and timber
RECOMMENDED USES

  • As low vapour transmission rate barrier membrane prior to the application of Bostik Ultraset Timber flooring adhesive.
  • As a low water vapour transmission rate barrier membrane coating in the building and construction industries.
  • As a water proofing membrane to prevent water seepage or moisture penetration through to the interior of walls and floors.
  • As a waterproofing vapour barrier in tanking applications and sealing over damp concrete surfaces either as an internal finish or prior to over-coating with other coatings.
  • A highly tolerant membrane / barrier to prevent water seepage or permeation for floors, walls, water storage tanks or reservoirs and swimming pools.
  • Safe to use in sensitive location (e.g. around food or habitable areas). Low odour.
  • May be used as a waterproof primer prior to the application of Ultraseal, Boscoseal PU, one and two part polyurethane sealants, and cementitious floor screeds.
  • As an effective vapour barrier on concrete or masonry prior to the application of timber flooring or panels.
  • As a water proofing membrane, curing compound and barrier coating over freshly laid hardened (green) concrete.

BOSTIK ULTRA MASTIK TILE ADHESIVE




BOSTIK ULTRA MASTIK - TILE ADHESIVE
White tile adhesive with a very smooth feel.
Superb holding capacity without slump.

Features

  • Silky trowel feel
  • Commercial / High Traffic Grade
  • Flexible  - S1
  • Superb non slump (holds 600x600mm wall tile without slip) - T
  • High strength bond  - C2
  • Best choice for large wall tiles
  • Well suited for outdoor/ wet area tiling
  • All substrates except timber
  • All tiles except moisture sensitive

Recommended Uses

Can hold a 600x600mm tile on the wall.  Well suited to large tiles, wall tiling and large jobs.

Classifications/Standards

AS4992 Classification:  C2S1ET

Packaging: 25kg bag



EUROPLAST PV (TORCH ON MEMBRANE)



EUROPLAST PV bitumen membrane are plastomeric waterproofing membranes manufactured from a rich mixture of bitumen and selected polymers (Atatic Poly Propylene) blended together to obtain excellent heat & UV resistance and waterproofing properties. The polymerized bitumen is coated on to a dimensionally stable reinforcement core of non-woven spun bond polyester rot-proof fabric. The membrane has excellent tensile & tear strength and has high fatigue and puncture resistance.

USES
EUROPLAST PV is used as waterproofing/damp proofing membrane for protection of various substrates in wide range of applications which included the following:
 Roofs
 Terraces, balconies & patios
 Sunken slabs
 Concrete foundations & footings
 Basements
 Pile heads
 Bridges & tunnels
 Airport aprons & ramp areas
ADVANTAGES
 High resistance to positive water & vapor pressure
 Good dimensional stability under tension
 Excellent flexibility
 High puncture and fatigue resistance
 High tensile and tear strengths
 Resists water borne chemicals
 Accommodates structural movement

Roll size: 1m x 10m
Thickness: 3.5mm, 4mm


BOSTIK ULTRACOTE RC2 (FLEXIBLE ACRYLIC WATERPROOFING COATING)


Bostik Ultracote RC2 Flexible Acrylic Waterproofing Membrane

Description
Ultracote RC2 is specifically formulated for use in conjunction with open weave polyester matting and tape reinforcement in commercial and residential internal and external waterproofing applications. Low in odour, it is well suited to internal use and offers excellent, easy application by brush or roller.

Recommended Uses
  • Internal wet areas to be tiled including showers, bathrooms, toilets and laundries.
  • External balconies and decks prior to the installation of a covering material such as tiles or non-solvent topping systems.
  • Non traffic podium or roof areas subjected to weather and U.V. exposure.
  • Suitable for waterproofing a broad range of substrates including: concrete, cement render, brickwork, particleboard, plywood, plasterboard, gyprock, composition board and fibre cement sheeting.
Features & Benefit
  • Low odour for ease of use in internal applications.
  • Excellent rolling and brushing ability.
  • Water based on flexible.
  • Easy application and clean up.
  • Excellent UV light resistance.
Packaging :  20litre pail
Color        : White or Grey

 SIRIM Test Report
  • ASTM  G154-06; ASTM D412-06; ASTM D2240-05 (2010); ASTM D4541-09; ASTM D1653-03 (2008)
 Green Label Certificate
  • Certification No: 032-091
  • Environmentally Friendly, Low

BONDFILLA (MULTI PURPOSE FILLER FOR HAIRLINE CRACKS)





    
DESCRIPTION
A one component acrylic based filling compound used as instant filling compound for cracks, nail holes in cement, plaster and wood.  Multi-patch Bond Filler is also suitable for sealing of cracks and levelling uneven plaster and cement surfaces.  This product is easy to apply and fast drying.


GENERAL
Multi-patch Bond Filler is a one part premix ready to use filler for interior and exterior applications.  It is based on an acrylic polymeric material providing an excellent durability, adhesion and water resistance.  Careful selection of the elastomers used in formulating the Multi-patch Bond Filler assures excellent resistance to atmospheric agents, ultra-violet rays and the industrial atmosphere.  The high solid content of Multi-patch Bond Filler allows the creation of great thickness with a few layers of application.  When cured, Multi-patch Bond Filler imparts excellent bond and flexibility to well prepared substrates.  The elasticity of the Multi-patch Bond Filler can  accommodate  a small degree of movement of the structure.

TECHNICAL DATA
Viscosity                                paste
Set to Touch                           30-45 minutes
Tack Free                               90 minutes
Specific Gravity                    1.5

Packaging: 9kg pail or 0.5kg container